background image

https://puls.calamp.com/wiki/TTU-2900_Hardware_%26_Installation_Guide 

24/29 

7/21/2020 

TTU-2900 Hardware & Installation Guide - PULS Wiki 

 

 

unlimited or a specified number of users has been purchased). Each Use License is specific to one client-side Application only and may not be 
used for any other client-side Application. Each Server license is limited to Server-based Applications deployed on that Server for which the 
license has been purchased as specified in a CalAmp License Certificate. The Software is licensed on a per Developer, and on a per User, per 
Application basis. In order to preserve and protect its rights under applicable law, CalAmp is not selling you ownership rights to Software or 
Documentation (owned by or licensed to CalAmp). CalAmp specifically retains title to all CalAmp Software, Documentation and Related 
Materials and CalAmp licensors retain title to items owned by them. 

 
 

Duration: 

This License Agreement is effective from the day you install or start using the Software, or receive or download it electronically, and 

continues until terminated. If you fail to comply with any provision of the License, termination is automatic, without notice from CalAmp and 
without the necessity for recourse to any judicial authority. Upon termination, you must destroy the Related Materials, the Software, 
Documentation and all Software and Documentation copies. CalAmp can also enforce its other legal and equitable rights. 

 
 

Developer License Only—Uses Permitted: 

Software and Documentation may be used for the sole purpose of developing Applications and only 

by a licensed Developer. Software and Documentation may be installed onto a hard disk drive or a Server, access to which is restricted to 
Developers for which a Developer License has been purchased and may also be stored or installed on a storage device such as a network server, 
used only to install or access the Software or Documentation on your other computers over an internal network; however, you must have acquired  
a license for each separate computer on which the Software or Documentation is installed or accessed from the storage device. A Developer 
License may not be shared or used concurrently on different computers. One backup copy may be made for each legally obtained media copy or 
electronic copy you have received, provided that all CalAmp and third party licensor information — including copyright notices — are maintained 
and possession of the copy is retained in a secure location. In addition, you agree to use reasonable efforts to protect the Software and 
Documentation from unauthorized use, reproduction, distribution or publication. All rights not specifically granted in this License are reserved by 
CalAmp. 

 
 

Customer agrees to include the notice “Copyright © 1999 – 2009 CalAmp DataCom Inc., All Rights Reserved” in Applications developed with  
the Software. Customer agrees to include the following CalAmp Copyright and Government Restricted Use notice in all documentation and in any 
Application on-line help or readme file. 

 
 

“Portions of this computer program are owned by CalAmp DataCom Inc., Copyright © l999 – 2009, CalAmp DataCom Inc., All Rights Reserved. 
Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph ©(1)(ii) of the Rights in Technical Data and 
Computer Software clause at DFARS 252.227-7013 or subparagraphs ©(l) and (2) of the Commercial Computer Software-Restricted Rights at 48 
CFR 52.227-19, as applicable. Manufacturer is CalAmp DataCom Inc., 1401 North Rice Ave. Oxnard, CA 93030. Rights are reserved under 
copyright laws of the United States with respect to unpublished portions of the Software.” 

 
 

Developer(s) License—Uses Not Permitted: 

Unless Otherwise Agreed To In Writing with CalAmp, You May Not (1) Make derivative works 

including but not limited to translations, adaptations, arrangements or any other alteration (each of which would become the property of CalAmp  
or its licensors, as applicable) or make copies of the Software or Documentation except as permitted above; (2) Make copies of the Related 
Materials; (3) Use any CalAmp product to translate the product of another licensor unless you have the legal right to do so; (4) Allow a greater 
number of Developers to access the Software at any one time than the total number of Developer licenses for which you have paid; (5) Rent, lease, 
sublicense or lend the Software, Software Copies, Documentation, Documentation Copies, Related Materials or your rights under this License or 
allow access to the Software for unlicensed users; (6) Alter, decompile (except to the limited extent that decompilation by the licensed Developer 
only is necessary as the only available way to achieve interoperability with other programs and, in that situation, any resulting information cannot 
be used in developing, producing or marketing any software substantially similar in expression to the Software), disassemble or reverse engineer 
the Software; (7) Make any attempt to unlock or bypass any initialization system or encryption techniques utilized by the Software or 
Documentation; (8) Alter, remove or obscure any proprietary legend, copyright or trademark notice contained in or on Software, Documentation  
or Related Materials; or (9) use the Software to create an Application intended solely to duplicate functionality of an existing CalAmp end user 
software product. 

 
 

Use Licenses: 

For each Server or Site License purchased, CalAmp grants the Customer the right to distribute Applications on a single Server or at 

a single Site, as the case may be, accessible to the number of individual users (not concurrent users) for which the Server or Site License has been 
purchased as evidenced by a CalAmp License Certificate. For each Use License purchased, as evidenced by a CalAmp License Certificate, 
CalAmp grants the Customer the right to distribute a single Application to a single User. In no circumstance may Customer distribute an 
Application under a site license or concurrent use license unless a comparable license has been purchased for the Software as evidenced by a 
CalAmp License Certificate. Customer agrees that distribution of an Application to a User will in all cases be accompanied by a license agreement 
containing at a minimum terms and conditions substantially similar to and at least as restrictive as the following: 

 
 

The User may not (1) Make derivative works including but not limited to translations, adaptations, arrangements or any other alteration of the 
Application or make copies of the Application, except one backup copy may be made for each legally obtained copy of the Application, provided 
that all CalAmp and third party licensor information — including copyright notices — are maintained and possession of the copy is retained in a 
secure location; (2) Allow access to the Application for unlicensed users; (3) Rent, lease, sublicense or lend the Application or its rights under the 

Summary of Contents for TTU-2900





























Reviews: