ITC 220 Base Station, Locomotive & Wayside Radio Transceiver Field Service Guide PN 0046300120 Rev. A
| Page 53
6.
Under
File Type
, select
App
.
7.
Click
Browse
, then locate and select the software image file.
8.
After you select the software image file:
The
Destination File Name
field is automatically populated with a file name derived from the selected image file
name.
Ensure that the destination file name meets the 8.3 filename requirements, meaning that the filename can have
at most eight alphanumeric characters, followed by a period and extension of at most three alphanumeric
characters. A few special characters are also allowed (namely, ! # $ % & ' ( ) - @ ^ _ ` { } and ~) Alphabetical
characters are treated as case-insensitive.
9.
To select this image immediately after it is downloaded, select the
Select
check box.
When you select the Select check box, XtermW automatically executes the
APPS,SELECT,image-file
command after the software image is downloaded. It also causes XtermW to enable the
Boot
check box.
The
Boot
check box is available only when you select the Select check box. When you select the
Boot
check box,
XtermW automatically executes the
BOOT
command after the
APPS,SELECT,image-file
command, causing
the newly downloaded image to become the active image after a reboot.