ITC 220 Base Station, Locomotive & Wayside Radio Transceiver Field Service Guide PN 0046300120 Rev. A
| Page 25
8.
In
XtermW
, set the connection properties for the
MAINT
port connection as shown in the following figure.
Figure 15 XtermW Configure Port window with settings for MAINT port
Note TCP/IP Settings for Host on the
MAINT
port is configured for IP address
192.168.255.201
.
5.4.2
TO CONFIGURE THE COMPUTER ETHERNET 2 INTERFACE FOR COMMUNICATION WITH
THE TRANSCEIVER LAN PORT
1.
On the computer, click
Start
,
Control Panel
,
Network Connections
, and then
Local Area Connection
.
There will be one
Local Area Connection
icon for each Ethernet port on the computer. Click the
Local Area
Connection
icon that corresponds to the second Ethernet port.
2.
The
Local Area Network Connection Status
window opens. Click
Properties
and the
Local Area Connection
Properties
window for the second Ethernet connection opens.