EVERSKY
™
MS-CDF-019
–
Manufacturing Nr: 22
0001→
Version B
Update: 2022/06/14
39/70
The Modbus TCP protocol requires the following settings to be adjusted:
IP setting
DHCP (Dynamic Host Configuration
Protocol)
YES/NO
When DHCP is enabled, IP settings are assigned
automatically when the device boots from the DHCP
server of the subnet. A dynamic IP address will then
be assigned to the device.
In case DHCP is not enabled, it is necessary to
manually
assign
the
IP
parameters
(IP
address/Netmask/Gateway/DNS).
IP
Example: 192.33.50.120
Subnet mask
Example: 255.255.255.0
Gateway
Example: 192.33.50.40
DNS
Example: 192.33.50.5
Setting the Modbus TCP protocol
Device ID*
CorrigoVentilation
Device name on the Bacnet IP network
*The device ID is to be set according to the need of the BMS (recommended setting between 1 and 247) from the menu
Communication / Function port 1 / Communication Modbus (the device ID is shared between the RS485 port and the TCP-IP port).
XIV.12.
Bacnet IP Communication
If the IP Bacnet is enabled while the MS-TP Bacnet is also enabled, the MS-TP Bacnet will be automatically disabled, priority is given
to the IP Bacnet.
When IP Bacnet is enabled, TCP Modbus is automatically disabled since these two protocols share the same port.
The Bacnet IP protocol requires the following settings to be set:
IP Setting
DHCP (Dynamic Host Configuration
Protocol)
YES/NO
When DHCP is enabled, IP settings are assigned
automatically when the device boots from the DHCP
server of the subnet. A dynamic IP address will then
be assigned to the device.
In case DHCP is not enabled, it is necessary to
manually
assign
the
IP
parameters
(IP
address/Netmask/Gateway/DNS).
IP
Example: 192.33.50.120
Subnet Mask
Example: 255.255.255.0
Gateway
Example: 192.33.50.40
DNS
Example: 192.33.50.5
Bacnet IP protocol settings
Device name
CorrigoVentilation
Device name on the Bacnet IP network
BBMD Adress
Device ID low
2640
The concatenation of the low ID and the top ID gives
the ID of the controller (000002640 i.e. 2640)
Device ID high (x 10000)
0
UDP port number low
7808
The concatenation of the low and high UDP port
number gives the UDP port number (47808)
UDP port number high (x 10000)
4
The list of read/write accessible variables is available in the chapter XXIV DATA EXCHANGE TABLES.
