2009 Barbecue Grills and Carts
LTR20091038, Rev. E
Appendix
www.calspas.com
25
Step 2: Changing the burner orifices
Replace the infrared burner orifices
1 .
Using a 13mm wrench, remove the orifice for the infrared burner.
a.
Apply pipe compound to the fitting threads where you will place the
b.
new orifice.
Screw on the correct orifice for your grill until it is finger tight.
c.
Tighten the orifice with the 13mm wrench.
d.
If you have dual infrared burners, repeat the previous steps for the
e.
second burner.
Replace the back cover.
f.
Replace the side burner orifices
2 .
Remove the grate, burner cap and burner diffuser from the side
a.
burner.
Using a 7mm wrench, remove the orifice for the burner.
b.
Apply a small amount of pipe compound to the orifice threads.
c.
Screw in the orifice until it is finger tight.
d.
Tighten the orifice with the 7mm wrench.
e.
If you have dual side burners, repeat the previous steps for the
f.
second burner.
Replace the main burner orifices
3 .
Remove the grates, flame tamers, and drip tray from the grill.
a.
Remove the cotter pins from the end of the burners. The cotter pins
b.
are accessible from underneath the grill in the back in the accessory
cabinet.
Carefully remove the burner.
c.
Using a 6mm socket or nut driver, remove the orifice for the
d.
burner.
Apply a small amount of pipe compound to the orifice threads.
e.
Screw in the orifice until it is finger tight.
f.
Tighten the orifice with the 6mm wrench.
g.
Repeat the above steps for the remaining burners.
h.
Replace the burners, cotter pins, flame tamers, drip tray, and grates.
i.
Mark the rating plate
4 .
After conversion has been completed, mark the rating plate as NG with an indelible marker.
You will need:
6mm socket or nut
•
driver
Two to five 1.9mm
•
orifices (depending on
your grill
Pipe compound
•
suitable for natural gas
You will need:
13mm open end
•
wrench
One #50 orifice (for
•
single infrared burner)
Two #54 orifices (for
•
dual infrared burners)
Pipe compound
•
suitable for natural gas
You will need:
7mm wrench, socket,
•
or nut driver
One or two 1.75mm
•
orifices (depending on
your side burner)
Pipe compound
•
suitable for natural gas
Summary of Contents for 2009 Barbecue Grills and Carts
Page 1: ...LTR20091038 Rev E 8 18 09 ...
