9
Step 3
Note: This step is completed at the factory. It is only shown to illustrate
how to complete the unit assembly.
1) Place Base plate into the Griddle Head Weldment and secure using
5/16” x 1/2” Screws (4 ea.), 5/16” Flat Washers (4 ea.) and 5/16” Nuts (4
ea.)
Step 4
Note: This step is completed at the factory. It is only shown to illustrate
how to complete the unit assembly.
1) Using 4 ea. Burner Brackets place the Burner inside the Griddle
Head. Be sure to place the open end of the burner through the hole
provided in the side of the Griddle Head until it is flush with the
outside surface of the Griddle Head. Align the Burner with the series
of double holes in the Burner Base Plate.
2)
Place the 1/4” U
-Bolts over the Burner and through the Base Plate.
Secure the U-
Bolts using the 1/4” Flat Washers (8 ea.) and 1/4” Nuts
8 (ea.). Tighten the U-Bolt Securely.
Burner Brackets
Griddle Head Weldment
Burner
Burner Base Plate
