PN MN239 F | User Manual ENG - 17
NewLife Intensity 10
Cleaning, Care, and Proper Maintenance
WARNING: CLEAN THE CABINET,
CONTROL PANEL, AND POWER CORD
ONLY WITH A MILD HOUSEHOLD
CLEANER APPLIED WITH A DAMP (NOT
WET) CLOTH OR SPONGE, AND THEN
WIPE ALL SURFACES DRY. DO NOT
ALLOW ANY LIQUID TO GET INSIDE
THE CONCENTRATOR. PAY SPECIAL
ATTENTION TO THE OXYGEN OUTLET
FOR THE CANNULA CONNECTION TO
MAKE SURE IT REMAINS FREE OF
DUST, WATER, AND PARTICLES.
Cabinet
Turn OFF the unit and disconnect from power
before any cleaning or disinfection. DO NOT spray
the outer case directly. Use a damp (not wet) cloth
or sponge. Spray the cloth or sponge with a mild
detergent solution to clean the cabinet. Proceed as
directed by the cleaner manufacturer. Device cabi-
net should be cleaned at minimum between users.
WARNING: ELECTRICAL SHOCK
HAZARD. TURN OFF THE UNIT AND
DISCONNECT THE POWER CORD
FROM THE ELECTRIC OUTLET BEFORE
YOU CLEAN THE UNIT TO PREVENT
ACCIDENTAL ELECTRICAL SHOCK AND
BURN HAZARD. ONLY YOUR EQUIP-
MENT PROVIDER OR A QUALIFIED SER-
VICE TECHNICIAN SHOULD REMOVE
THE COVERS OR SERVICE THE UNIT.
WARNING: CARE SHOULD BE TAKEN TO
PREVENT THE OXYGEN CONCENTRATOR
FROM GETTING WET OR ALLOWING FLUIDS TO
ENTER THE UNIT. THIS CAN CAUSE THE UNIT TO
MALFUNCTION OR SHUT DOWN, AND CAUSE AN
INCREASED RISK FOR ELECTRICAL SHOCK OR
BURNS.
WARNING: DO NOT USE OIL, GREASE, OR
PETROLEUM-BASED OR OTHER FLAMMABLE
PRODUCTS WITH THE OXYGEN-CARRYING AC-
CESSORIES OR THE OXYGEN CONCENTRATOR.
OXYGEN ACCELERATES THE COMBUSTION OF
FLAMMABLE SUBSTANCES.
NewLife Intensity 10:
Concentrator casing .......... Valtra/ABS/Polystyrene
Mains cable ......................................................PVC
Dust filter ..................................................Polyester
ON/OFF switch ................................ Thermoplastic
Casters ............................................................Nylon
Flow adjustment .......................ABS/Polycarbonate
Gas outlet ...............................Chrome Plated Brass
Printed labels ..................................................Lexan
Materials in Direct or Indirect Contact with Operator
