background image

Call Us Toll-Free Today!

1.833.203.2473

WWW.CAIREMEDICAL.COM

PLEASE CONSULT THE APPLICABLE PRODUCT INSTRUCTIONS FOR 

USE FOR PRODUCT INDICATIONS, CONTRAINDICATIONS, WARNINGS, 

PRECAUTIONS, AND DETAILED SAFETY INFORMATION. 

© Copyright 2017 Chart Industries            ML-CONC0119 C

QUICK START GUIDE 

FREESTYLE

®

 AND FREESTYLE

®

 5

6

 

Regular Maintenance

5

 

Begin Using the FreeStyle

THIS QUICK START GUIDE IS NOT INTENDED TO REPLACE THE 

DETAILED INFORMATION AVAILABLE IN YOUR USER MANUAL, SO 

PLEASE REFER TO THE USER MANUAL FOR IMPORTANT CRITICAL 

INFORMATION REGARDING USE AND OPERATION  OF THE PRODUCT.

1)  Connect a nasal cannula to the oxygen outlet barb.   

     Ensure the connection is secure before operation.  

     The maximum cannula length should not exceed 25 ft.

2)  Turn on the FreeStyle or FreeStyle 5 by pressing the

     numeric flow selection button of the pulse flow setting

     prescribed by your physician to turn on the device.

A brief audible alarm will sound to indicate the device has 

powered on and the green light above the flow selection 

button you pressed should remain illuminated.

3)  Position the nasal cannula on your face per the 

     manufacturer’s instructions provided with the cannula

     and breathe normally. The green light above the 

     selected flow rate button will blink with each dose of 

     oxygen delivered when you breath in.  

4)  To change the flow setting, press the numeric button   

     of the new desired flow rate.  

     Turn the FreeStyle or FreeStyle 5 off by pressing the   

     button corresponding to the pulse flow indicator light

     that is illuminated.

Air enters the FreeStyle and FreeStyle 5 through an air 

intake filter located under the cover on the lower front of 

the oxygen concentrator.  This filter prevents dust and 

other large particles in the air from entering the unit.

At least once per week, the Air Intake Filter should be 

cleaned.

1)  Remove the filter cover from the front of the FreeStyle

     or FreeStyle 5 by pulling it outward.

2)  Remove the filter from the cover.

3)  Wash the filter in a warm solution of soap and water

4)  Rinse the filter thoroughly and remove excess

     water with a soft, absorbent towel.  Ensure the filter 

     is completely dry before replacing it.

5)  Replace the clean and dry filter in the filter cover and

     re-install the filter cover in the FreeStyle or FreeStyle 5. 

Reviews: