Call Us Toll-Free Today!
1.833.203.2473
WWW.CAIREMEDICAL.COM
QUICK START GUIDE
FREESTYLE
®
AND FREESTYLE
®
5
1) Install the Battery Pack:
Align the battery with the front housing from the right side
of the FreeStyle. Slide the battery inward until you hear a
click to confirm it has locked in place.
2) Connect External Power
Connect the universal power supply to the power
connector inlet on the side of the FreeStyle. Be sure
to push inward so that the connection is secure.
Connect one end of the AC power cord to the inlet on the
power supply brick. Connect the other end to a
wall outlet.
3
Initial Connection of the FreeStyle
The FreeStyle and FreeStyle 5 will recharge the battery
pack anytime it is installed in the concentrator and the
concentrator is connected to an external AC or DC power
source.
While charging a fully discharge battery, the 25% battery
gauge indicator light on top of the FreeStyle will begin by
blinking rapidly for a few minutes, and then start to blink
at a slower rate (every ½ second). The LED will continue
to blink until 25% battery capacity is reached. The LED
will then turn solid. Each of the 4 battery gauge indicator
lights (25-100%) will blink as stated above during charging,
then turn solid when they reach capacity.
When all 4 of the battery gauge indicator lights are solid,
the battery is fully charged. The lights will remain on for a
short period of time to indicate a full charge, and will then
turn off.
To check the battery charge when it is installed in the
FreeStyle, press the “BATT” battery status button on the
control panel of the concentrator. The battery gauge
indicator lights (25-100%) will illuminate above the BATT
button to indicate the level of the battery pack charge.
4
Charging the Battery
When external power (AC or DC) is properly connected,
A green light will appear on top of the power supply brick.
Shown Above is FreeStyle 5 Power Supply
Green Light
