![background image](http://html1.mh-extra.com/html/caire/equinox-paos-4000/equinox-paos-4000_provider-technical-manual_3343956027.webp)
Personal Ambulatory Oxygen System
Provider Technical Manual
20771733 D 27
Figure 33
4. Remove the Intake muffler from the foam section.
5. Gently lift up the foam section, while feeding the protruding wires
through the foam, and remove.
Figure 34
6. To replace the foam section and intake muffler, repeat steps 1-5 in
reverse order.
IV. Removing/Replacing the
Compressor Assembly
1. Remove the Top Exhaust Port by gently pulling upward.
Figure 35
2. Remove the Bottom Exhaust Port by slightly lifting up on the
Exhaust Blower Outlet and pulling up the Bottom Exhaust Port.
Figure 36
3. Disconnect the Compressor Assembly power connections circled
below.
Note:
Using tweezers or small pliers to grab the connector is
recommended.
Figure 37