![background image](http://html1.mh-extra.com/html/caire/equinox-paos-4000/equinox-paos-4000_provider-technical-manual_3343956019.webp)
Personal Ambulatory Oxygen System
Provider Technical Manual
20771733 D 19
Voice Module Operation
Voice Module Operational Instructions
The eQuinox is equipped with the capability of providing vocal
notifications and operational status intended to supplement
information displayed to the end user via LED (light emitting diodes)
and/or the unit display. The following information provides instructions
on how to enable/disable the voice module function, adjust loudness,
and change language as preferred by the end user.
Figure 21
Enable/Disable the Voice Module
1. To enable/disable the voice module function, power on the unit
by pressing the ON/Standby Key.
2. After the unit has powered on, press the No Smoking Icon and
Hidden Key once.
3. Within 1–2 seconds, the SPKR = ON or SPKR = OFF menu item will
be present.
4. Press the Increase or Decrease Flow Rate Key to toggle the
selection to ON (enable voice module) or OFF (disable voice
module).
5. Within 3–5 seconds, the option selected will become active.
Note:
This will only disable the voice module function once.
When the device is turned off and device is reset, the
voice module function will automatically be enabled.
Increase/Decrease the Volume of Vocal
Notifications
1. To increase or decrease the volume of vocal notifications, press
the No Smoking Icon & Hidden Key twice.
2. The Volume = # - (Volume Setting Menu) will be present.
3. Press the Increase or Decrease Flow Rate Key to increase or
decrease the volume level from 1 to 10.
4. After selecting the desired loudness, the option will become
active/set within 3–5 seconds.
Changing Voice Module Language
1. To change the voice module language, press the No Smoking
Icon & Hidden Key five times to access the language options.
2. The current activated language will be indicated on the display.
For example, if the voice module is speaking English when
accessing the language options menu, “English” will be the text
that appears on the display.
3. Press the Increase or Decrease Flow Rate Key to scroll through the
languages available.
4. Once the desired language is displayed, allow the units to sit and
the visible language will automatically be set in 3 – 5 seconds.