9
1
8
2
7
3
6
4
5
5
Ex:
Group filters
attributes:
7 filters to the UHF1 input and 3 filters in the UHF2 input
Each filter can be set to a width of variable bandwidth between 8 and 56 Mhz
in 8 Mhz increments, 1 channel UHF 7-channel UHF channel increments.
So the configuration
7 3
can manage :
1 to 49 UHF channels by the entered UHF1
1 to 21 UHF channels by the UHF2 input
4 / programming of the filters
Once the configuration of filters you want, you will enter programming mode.
This mode lets you set the UHF filters and their gain.
10 amplifier filters are freely configurable by width (from 1 to 7 channels) and
attenuation level (of 0 to – dB Typ 30).
Press the button
⋀
,
is displayed.
The point between F1oF lets you know that you set the 1
St
channel of the filter.
Press
'OK'
: the display flashes.
Has the keys
⋀
and
⋁
set the 1
St
channel of the filter.
Press
'OK'
to confirm.
Press the button
⋀
, is displayed.
The point at the end of F1oF lets you know that you set the last channel of the
filter.
Press
'OK'
, the display will Flash.
With touch
⋀
and
⋁
set the last channel of the filter.
Ex :
Press
'OK'
to confirm.
7
7 3
F1.oF
F1oF.
F125.
