Note: P.000 means that the protection (of default) code has been
disabled.
12 / RESET of the Central
At any time, the factory amplifier can be restored (all filters without programmed
channels and all filters and attenuator set to 0 dB).
Disconnect the power from the power supply.
Press the
'OK'
button.
At the same time, reconnect the Central sector.
Wait 4 dashes appear on the display.
Release the
«OK»
key.
The screen returns to the position 'POWER ON' (screen off, bottom right led).
The amplifier is soft again.
13 / PRECAUTIONS FOR USE AND SAFETY
This programmable terrestrial plant has been designed in accordance with international
safety and security laws in force.
Please read these instructions for use.
1 / CONNECTION OF THE SECTOR (198-264 VAC50/60 HZ)
This product must be connected to the mains. Where there is any doubt about the type
of connection available on installation, see EDF.
Before any operation of maintenance or modification on the installation are
implemented, the control unit must be disconnected.
2 / SURGE
An overvoltage on the mains cable, or from any extension to which it would be
connected, can lead to short circuits or fire. Never put the overvoltage power cables.
11
