11
Fig. 13
Fig. 12
Height adjustment and hanging in the Infant-Sling-Mount
The height of the connector plate
8
can be set to one of three levels
according to preference. Loosen
the belt straps, set the plate height
and pull the belt straps tight again
(Fig. 12).
Thread the connecting straps
9
into
the Infant-Sling-Mount, then place
one right G-hook and one left G-hook
(
5
and
6
) at the ends (Fig. 13).
Fig. 14 Hanging in, rear
Fully hang the Infant-Sling-Mount
with the G-hooks into the loops at
the foot, so that the hook at the front
end has a lateral hold in the loop
(Fig. 14).