24
11.1
Emptying
11.1.1
Waste water
If the waste water container is full, the "Waste water
full" message is indicated on the display of the c35.
CAUTION
There is the risk of odour formation, stubborn soil-
ing and mould development in the waste water
canister.
➤
The waste water canister must be emptied at
least once a day.
Operation:
➤
Message: "Waste water full" is indicated on the
display.
1| Empty waste water canister.
2| Re-insert waste water canister.
3| Acknowledge query on the display "Waste water
emptied" with "Yes".
The waste water canister must be emptied at least
once a day.
11.1.2
Coffee grounds
If the grounds drawer is full, the "Drawer" message is
indicated on the display of the c35.
CAUTION
If the grounds drawer is overfull, the c35 will no
longer run. To ensure a smooth operation, please
empty the grounds drawer immediately if the
message is indicated on the display.
Operation:
➤
"Drawer" message is indicated on the display.
1| Take out and empty grounds drawer.
2| Re-insert grounds drawer.
➤
"Drawer emptied?" message is indicated on the
display.
3| Acknowledge with "Yes".
11.2
Filling
11.2.1
Coffee beans and coffee powder
If one of the coffee bean hoppers is empty, the "Bean
hopper 1 empty" or "Bean hopper 2 empty" message is
indicated on the display of the c35.
CAUTION
Place only whole coffee beans in the bean hop-
pers.
Operation:
➤
Messages "Bean hopper 1 empty" or "Bean hop-
per 2 empty" and "Fill beans 1" or "Fill beans 2" are
indicated alternately on the display.
1| Fill coffee beans.
2| Acknowledge with the Stop key.
3| Acknowledge with "Yes".
11.2.2
Fresh water
If the fresh water container is empty or the fresh water
connection is interrupted, the "Fresh water empty" or
"No water" message is indicated on the display of
the c35.
Operation of canister with level display:
➤
"Fresh water empty" message is indicated on the
display.
1| Fill fresh water canister.
2| Acknowledge query on the display "Fresh water
filled" with "Yes".
Operation of direct fresh water connection:
➤
"No water" message is indicated on the lower edge
of the display.
1| Check whether the shut-off valve of the external
water supply is open and open it if required.
11.2.3
Milk (only if milk level indicator fitted)
If one of the milk containers is empty, the "Fill milk"
message is indicated on the display of the c35.
Operation:
➤
"Fill milk" message is indicated on the display.
1| Fill milk.
➤
"Milk filled?" message is indicated on the display.
➤
Following acknowledgement, the appliance auto-
matically switches to operating mode.
If there is a milk fault, the milk pump is activated with
the "Inlet milk" function and the whole system is filled
with milk.
Operation:
1| Insert "USER" chip card and select "Inlet milk".
➤
The system draws in the milk.
11 Emptying and Filling
Summary of Contents for C35
Page 1: ...Original operating instructions c35...
Page 33: ...33 18 EC Declaration of Conformity...
Page 34: ...34 19 Notes...
Page 35: ...35...