INSTALLATION AND SERVICE MANUAL for AVALON
Gourmet
25
www.cafection.com
(800) 561-6162
AVALON Gourmet rev. 7 2013/04
Initial Setup
3.15.1 Main board (PCB) description
Interactive switches and buttons
1.
Reset Button (Red)
Pressing this button initializes the 3 Bean
Brewer (same as the on/off switch)
2.Setup Button (SW1) Black
Pressing this button gives you access to the
product and brewer software parameters.
3.Counter Button (SW2) White
Pressing this button gives you access to the
tally counter data.
4.
Free Vend Switch (SW3) Black
OFF, this switch allows users to have free
beverages.
5.
Brewer Switch (SW4) Black - DS37
ON, the switch lifts the brewer head to allow
filter paper replacement. The switch must be
in the OFF position for default user mode. If
activated, it will reset the waste bin counter.
6.
Ingredient Switch (SW5) Black - DS12
Allows the neutralization of the ingredient
dispensing motors. At OFF, the motors will not
dispense ingredients.
7.
Water Switch (SW6) Black - DS36
Allow the neutralization of the 4 water
dispensing valves. At OFF, the valves will not
dispense water.
Green LEDs
The green led will illuminate to
indicate the following status.
DS1 -
Power 5Volts ok
DS18 -
Drip tray overflow
DS13 -
Brewer error
DS14 -
Filter paper ok
DS15 -
Low water level
Red LEDs
The red led will illuminate to
indicate the part is in use.
DS38 -
Power 24Volts ok
DS3 -
Coffee #1 motor ingredients
DS4 -
Coffee #2 motor ingredients
DS5 -
Coffee #3 motor ingredients
DS6 -
Soluble #1 motor
ingredients
DS7 -
Soluble #2 motor
ingredients
DS9 -
Brewer motor
DS10 -
Inlet valve
DS11 -
Grinder motor
DS12 -
Ingredient output are
disable
DS21 -
Chute Solenoïde
DS22 -
Coffee hot water valve
DS29 -
Soluble #1 hot water valve
DS31 -
Soluble #2 hot water valve
DS32 -
Hot water valve
DS33 -
Mixer Motor Soluble #1
DS34 -
Mixer Motor Soluble #2
DS36 -
4 water dispensing valves
disable
