![background image](http://html1.mh-extra.com/html/cafe-0/chs90xp/chs90xp_owners-manual_3361807009.webp)
49-2000573 Rev. 4
9
USING THE RANGE:
Surface
Units
/ Cookware
for
Induction
Cooktop
Surface Units (Cont.)
How To Synchronize Left Elements
NOTE:
The left elements of the cooktop can be controlled
together via the Sync Burners feature. Sync Burners
feature is useful for cooking activities such as griddle
cooking. The
Sync Burners
feature is only intended for
cookware that completely spans both burners.
Knob Operation
1. Ensure both left element knobs are
Off
.
2. Turn the
Sync Burners
knob to the desired
heat setting.
Using the Warming Zone (on some models)
WARNING
FOOD POISON HAZARD:
Bacteria may grow in food at
temperatures below 140°F.
■
Always start with hot food. Do not use warm setting to
heat cold food.
■
Do not use warm setting for more than 2 hours.
The
WARMING ZONE
, located in the back center of
the glass surface, will keep hot, cooked food at serving
temperature. Always start with hot food. Do not use to
heat cold food. Placing uncooked or cold food on the
WARMING ZONE
could result in foodborne illness.
To turn the
WARMING ZONE
on, turn knob clockwise to
the setting you want.
For best results, all foods on the
WARMING ZONE
should be covered with a lid or aluminum foil. When
warming pastries or breads, the cover should be vented
to allow moisture to escape.
The initial temperature, type and amount of food, type of
pan, and the time held will affect the quality of the food.
Always use pot holders or oven mitts when removing
food from the
WARMING ZONE
, since cookware and
plates will be hot.
Sync Burners
Cookware for Induction Cooktop
Using the correct size cookware
The induction coils require a minimum pan size to
function properly. Pans that are not ferrous or are too
small will not allow the induction elements to turn on, and
the ON indicator for that element location will flash for 25
seconds and then turn off. If a pan is removed from or not
centered on the induction coil for more than 30 seconds,
the power for that element will be shut off.
Cookware larger than the element ring may be used;
however, heat will only occur above the element.
For best results, the cookware must make FULL contact
with the glass surface. Cookware that is small may be
too light to compress the Precision Cooktop Sensor on
models with sensor on left front burner and should not
be used on that burner. Small pans with heavy handles
are likely to be incompatible with the Precision Cooktop
Sensor.
Do not allow the bottom of the pan or cookware to touch
the surrounding metal cooktop trim.
For best performance, match the pan size to the element
size. Using a smaller pot on a larger burner will generate
less power at any given setting.
Use the minimum size pan shown
for each cooking element.
5” Min. Dia.
Pan Size
5” Min. Dia.
Pan Size
4-1/2”
Min. Dia.
Pan Size
7” Min. Dia.
Pan Size