28
49-2000573 Rev. 4
Range – Interior
Racks
All racks can be washed with warm, soapy water.
Enameled (not shiny) racks can be left in the cavity
during self clean (on some models).
Racks may be more difficult to slide, especially after
a self-clean. Put some vegetable oil on a soft cloth or
paper towel and rub onto the left and right edges.
The interior of your new oven can be cleaned manually or by using Steam Clean or Self Clean (on some models) modes.
Spillage of marinades, fruit juices, tomato sauces and basting liquids containing acids may cause discoloration and
should be wiped up immediately. Let hot surfaces cool, then clean and rinse.
IMPORTANT:
For models with Oven Camera in the door: If door glass or oven cavity light cover are not clean,
camera image clarity may be affected. Please follow directions below to properly clean the door glass. For best
results, clean door glass and oven light cover immediately after spillage once the oven has cooled.
Manual Cleaning
Do not use oven cleaners (unless certified for self-
cleaning oven), abrasive cleansers, strong liquid
cleansers, steel wool, or scouring pads on the interior
of the oven. For soils on the oven bottom and other
enameled surfaces, use a gentle abrasive containing
oxalic acid, such as Bar Keepers Friend
®
, with a non-
scratch sponge. Take care not to apply any abrasive
cleaners or sponges to the door glass, as it will scratch
the reflective coating. The oven interior and door glass
may be cleaned using a soft cloth with a mild soap and
water, or vinegar and water solution. After cleaning, rinse
with clean water and dry with a soft cloth.
Steam Clean Mode
The Steam Clean feature is for cleaning light soil from
your oven at a lower temperature than Self Clean.
To use the Steam Clean feature:
1. Start with the oven at room temperature.
2. Wipe excess grease and soils from the oven.
3. Pour one cup of water onto the bottom of the oven.
4. Close the door.
5. Press the
Clean
pad, select
Steam Clean
and
then press
Start/Enter
.
Do not open the door during the 30 minute steam clean
as this will decrease the steam clean performance. At
the end of the Steam Clean cycle, soak up the remaining
water, and wipe the moisture-softened soil from the oven
walls and door.
Self Clean Mode (on some models)
Read Self-Cleaning Oven Safety Instructions at the
beginning of this manual before using the Self Clean
Mode. Self Clean uses very high temperatures to clean
the oven interior. For a moderately soiled oven, run a
3 hour self-clean cycle. For a heavily soiled oven, run
a 5 hour self-clean cycle. Only self-clean (black) racks
and grates may remain in the oven during the self-clean
cycle. All other items, including nickel plated (silver) racks,
should be removed. If nickel plated (silver) racks are left
in the oven during a self-clean cycle, the racks will tarnish.
If either type of rack is left in the oven during a self-clean
cycle, the rack may become difficult to slide. See the
Oven Racks section for instructions on how to improve.
IMPORTANT:
The health of some birds is extremely
sensitive to the fumes given off during the self-cleaning
cycle of any range. Move birds to another well-
ventilated room.
To use the Self Clean feature:
1. Start with the oven at room temperature.
2. Wipe excess grease and soils from the oven and
interior door.
3. Remove all items other than self-clean (black)
racks and grates, if desired. See Cleaning the
Cooktop to determine if your grates may be self-
cleaned and for important details regarding grate
placement.
4. Close the door.
5. Press the
Clean
pad, select
Self Clean
and then
press
Start/Enter
.
You cannot open the door during the self-clean cycle.
The door will remain locked after the self-clean cycle until
the oven cools below the unlocking temperature. At the
end of the self-clean cycle, allow the oven to cool and
wipe any ash out of the oven.
To Stop a Self-Clean Cycle
Press the Cancel/Off pad. Wait until the oven has cooled
below the locking temperature to unlatch the door. You
will not be able to open the door right away unless the
oven has cooled below the locking temperature.
On Some Models:
The surface units are automatically disabled during the
self-clean cycle. Make sure that all surface unit controls
are turned off at all times during the self-clean cycle.
Wait until the self-clean cycle is finished to set and use
the surface units.
CARE AND CLEANING:
Range – Interior
