Caen V2718 Technical Information Manual Download

Page: 73 / 79

Document type:

Title:

Revision date:

Revision:

User's Manual (MUT)

Mod. V2718 VME PCI Optical Link Bridge

03/07/2018

NPO:

Filename:

Number of pages:

Page:

00106/03:V2718.MUTx/11

V2718_REV11.DOC

4.3.40.

CAENVME_SystemReset

Parameters:

[in] Handle

: The handle that identifies the device.

Returns:

An error code about the execution of the function.

Description:

The function performs a system reset on the module.

CAENVME_API
CAENVME_SystemReset(long Handle).

4.3.41.

CAENVME_ResetScalerCount

Parameters:

[in] Handle

: The handle that identifies the device.

Returns:

An error code about the execution of the function.

Description:

The function resets the counter of the scaler.

CAENVME_API
CAENVME_ResetScalerCount(long Handle).

4.3.42.

CAENVME_EnableScalerGate

Parameters:

[in] Handle

: The handle that identifies the device.

Returns:

An error code about the execution of the function.

Description:

The function enables the gate of the scaler.

CAENVME_API
CAENVME_EnableScalerGate(long Handle).

Summary of Contents for V2718
















































































Search results

Summary of Contents for V2718

Reviews:

Related manuals for V2718

Brands by name

Popular brands

Caen V2718, Technical Information Manual

Search results

Summary of Contents for V2718

Reviews:

Related manuals for V2718

Brands by name

Popular brands