CAEN
Electronic Instrumentation
803x Series 8-16 Ch. Programmable HV Power Supplies
27
5.
Instructions for Cleaning
The equipment may be cleaned with isopropyl alcohol or deionized water and air dried. Clean the exterior
of
the product only.
Do not apply cleaner directly to the items or allow liquids to enter or spill on the product.
Cleaning the Touchscreen
To clean the touchscreen (if present), wipe the screen with a towelette designed for cleaning monitors or
with a clean cloth moistened with water.
Do not use sprays or aerosols directly on the screen; the liquid may seep into the housing and damage a
component. Never use solvents or flammable liquids on the screen.
Cleaning the air vents
It is recommended to occasionally clean the air vents (if present) on all vented sides of the board. Lint,
dust, and other foreign matter can block the vents and limit the airflow. Be sure to unplug the board
before cleaning the air vents and follow the general cleaning safety precautions.
General cleaning safety precautions
CAEN recommends cleaning the device using the following precautions:
•
Never use solvents or flammable solutions to clean the board.
•
Never immerse any parts in water or cleaning solutions; apply any liquids to a clean cloth and
then use the cloth on the component.
•
Always unplug the board when cleaning with liquids or damp cloths.
•
Always unplug the board before cleaning the air vents.
•
Wear safety glasses equipped with side shields when cleaning the board
