CAEN
Electronic Instrumentation
803x Series 8-16 Ch. Programmable HV Power Supplies
20
Module access via VT emulator
The connection can be performed via VT emulators; we suggest using Tera Term
(see https://ttssh2.osdn.jp/index.html.en)
USB
Launch the terminal emulator, select the serial
communication link and set the virtual
communication port associated to the module.
Select USB connection and the used port
number; set port as follows
baud rate 9600
Data bits: 8
Parity: none
stop bit: 1
Flow control: none
Launch communication
Type caen then <enter>;
Ethernet
Launch the terminal emulator, select port number
1470
Please note that line editing must be disabled prior
to Ethernet access (EnableLineMode=off in the
Teraterm.ini configuration file).
Default settings are:
IP address
192.168.0.250
Subnet mask
255.255.255.0
Gateway
0.0.0.0
Launch communication
Type caen then <enter>;
as the communication is established, the Terminal Board Menu will be displayed:
Ethernet Settings
N.B.: Ethernet settings can be updated ONLY with USB connection; type E on the Board menu: the
following screen will open:
Type S to save; the Ethernet Port is now ready to work with the new settings.
