Polarity Inverters
–
User’s Manual
29
6.
NGPS Configuration
The polarity inverter can be control with the NGPS power supply if connected
with the dedicated cable. The NGPS shall anyhow be configured to control
automatically the polarity inverter depending on the current value required: Direct if
a positive current set point is required or Revers if a negative current set point is
required.
Two are the configuration to configure/check in the NGPS web interface:
1.
the memory cell #130 shell have the text POLARITY_INVERTER
2.
the External Interlock #4 shall be Enabled with a Delay of 3500 ms, Interlock
Name can be changed with “Polarity Inverter Fault”
