Polarity Inverters
–
User’s Ma
nual
12
The rear panel of the polarity inverter contains the parts related to the control
and monitoring of the unit, see
Figure 3
: Rear WPOLINV200XA panel.
The main parts on the rear panel of the
WPOLINV200XA
polarity inverter are
listed below:
6
- POWER CABLES from the power unit have to be connected to the DC-IN and
the load to DC-OUT. DC-IN left connector corresponds to DC-OUT left
connector in case of direct polarity, otherwise it corresponds to DC-OUT
right connector. The same is true for DC-IN right connector, which
corresponds to DC-OUT right one in case of direct polarity;
7
-
CONTROL AND MONITORING
connector (C1);
8
-
EARTH
stud connection;
9
-
AC
Mains connector with its corresponding
ON/OFF button and Fuse. Fuse
must be 5 x 20 mm, 5 A T 250 V.
6
7
9
8
