Polarity Inverters
–
User’s Ma
nual
15
The rear panel without the cover is shown in
panel without cover on the DC busbars.
Figure 6:
Rear
WPOLINV400XA/600XA
panel without cover on the DC busbars.
The main parts on the rear panel of the WPOLINV400XA/600XA polarity
inverter models are listed below:
6
- POWER CABLES from the power unit have to be connected to the DC-IN and
the load to DC-OUT. DC-IN left bar corresponds to DC-OUT left bar in case
of direct polarity, otherwise it corresponds to DC-OUT right bar. The same
is true for DC-IN right bar, which corresponds to the DC-OUT right one in
case of direct polarity;
7
-
CONTROL AND MONITORING
connector (C1);
8
-
EARTH
stud connection;
9
-
AC
Mains connector with its corresponding
ON/OFF button and Fuse. Fuse
must be 5 x 20 mm, 5 A T 250 V.
6
7
9
8
