PreDAC User’s Manual
51
8.
Appendix
8.1
List of the Error Codes
The PreDAC unit replies with a
N
ot
A
c
K
nowledge (“NAK”) if the received
command is not correct or it is not accepted. This “NAK” reply is followed by a two
digit
“error code”
field, which indicates the error cause and/or type. The list of the
possible error codes is hereafter presented:
Error
Code
Error name
Brief description of error
00
Invalid command
Command field is not valid; the list of valid
commands is shown in the
Command Table Summary
section
10
Wrong SET command
channel parameter
Given parameter is not allowed SET command
channel setting (see
SET Command
)
11
Wrong SET command
value parameter
Given parameter is not allowed SET command
value setting (see
SET Command
)
12
Wrong TRG command
parameter
Given parameter is not allowed TRG command
setting (see
TRG Command
)
13
Wrong GATE command
parameter
Given parameter is not allowed GATE command
setting (see
GATE Command
)
16
Wrong STATUS
command parameter
Given parameter is not allowed STATUS command
setting (see
STATUS Command
)
17
Wrong INTERLOCK
command parameter
Given parameter is not allowed INTERLOCK
command setting (see
MAX Command
)
18
Wrong TEMP command
parameter
Given parameter is not allowed TEMP command
setting (see
TEMP command
)
Summary of Contents for PreDAC
Page 3: ...3...
