Capital Automotive Equipment
Model:4PG8000
The suction tube or pump filter is dirty.
Check and clean if needed.
Presence of air in the hydraulic system
Bleed the hydraulic system
The lifting capacity is not
sufficient
The pump is faulty
Check the pump and replace if
needed.
Oil leakages in hydraulic circuit
Check the circuit for any
leakage
The lift does not lower when
the lowering button is
pressed
The lowering valve does not work
properly
Check the valve and replace if
needed.
The lift does not lower
smoothly
Presence of air in the hydraulic system
Bleed the hydraulic system
Lubrication of sliders is not enough.
Grease
Sliders are damaged
Replace
The motor does not stop
when the lift reaches it
maximum height
The maximum height limit switch does not
work
Check the limit switch and
replace if needed
If the problems remain unsolved, call for technical support.
Chapter 9 Disposal of used oil
Used oil, which is removed from the power unit and the plant during an oil change, must be treated as a
polluting product, in accordance with the legal prescriptions of the country in which the lift is installed.
Chapter 10 Machine demolition
The machine must be demolished by authorized technicians, just like for assembling. The metallic parts can
be scrapped as iron. In any case, all the materials deriving from the demolition must be disposed of in
accordance with the current standards of the country in which the rack is installed. Finally, it should be
recalled that for tax purposes, demolition must be documented; submitting claims and documents
according to the current laws in the country in which the rack is installed at the time the machine is
demolished.