TR-MAN-6005
Operator’s Manual – 6005
Page 60 of 62
Cadman Power Equipment ▪ BOX 100, Courtland, Ontario, Canada N0J-1E0 ▪ Phone: 519-688-2222 ▪ Fax: 519-688-2100 ▪www.cadmanpower.com
Before Storing
Prior to storing the Soft Hose Caddy, Cadman Power Equipment
Limited requires that you clean the hoses with a proper clean-out
procedure (i.e. clean-out ball launcher or water flushing). Failure to
do so WILL result in gas build up in the hoses creating a great deal
of pressure. This can cause equipment failure which could result
in serious injury and/or death.
Maintenance Item
Figure
Procedure
Drain and clean out the
hose.
N / A
Use a clean-out ball (sold separately) following the
instructions provided with the unit.
OR
Flush with water (minimum of 2000 gallons
[7600 liters]) to completely purge the hose.
Clean, inspect and repack
the main chassis wheel
bearing.
N / A
See Spindle Assembly on page .
Replace the seals as required
Lubricate all grease points.
Figure 19
Using a grease gun, lubricate all grease fitting with
an appropriate amount of acceptable grease. (See
Lubricants)
Lubricate all chains
N / A
Brush each chain with acceptable grease.
(see “Lubricants”)
Table 2 – Required Maintenance - Before Storing
Before Start Up
(After long term storage)
Maintenance Item
Figure
Procedure
Review Operator’s manual
Review this manual to refresh your memory
regarding the proper operation of this machine.
This will reduce the potential for equipment
damage and user injury.
Complete each use
maintenance
Table 1
Complete all the maintenance procedures as
prescribed in the
Each Use
maintenance table.
Table 3 – Required Maintenance - After Long Term Storage
Lubricants
Grease:
Any good grade multi-purpose, waterproof grease is compatible
with the greasing requirements of your
Cadman Soft Hose Caddy
