TR-MAN-6005
Operator’s Manual – 6005
Page 10 of 62
Cadman Power Equipment ▪ BOX 100, Courtland, Ontario, Canada N0J-1E0 ▪ Phone: 519-688-2222 ▪ Fax: 519-688-2100 ▪www.cadmanpower.com
Unloading Your Hose Caddy
Complete the following instructions to unload your Soft Hose Caddy…
Step 1
Connect the hydraulic motor hoses to the primary hydraulic port
(if available)
.
Connect the third hydraulic motor hose
(Case Drain)
from the hydraulic motor to a
hydraulic motor return circuit
(leak-off line port)
. Each tractor manufacturer may
locate the hydraulic return circuit port in a different location based on each unique
model. Review your tractors operator's manual or contact your tractor dealer for the
location of this port. Connect the remaining cylinder hose pair.
It is important to ensure that the case drain hose is connected to a
restriction free drain port on the tractor. This port MUST not
exceed a working pressure of 100 psi [6.9 bar]. Connecting the
case drain line to a pressurized port WILL result in motor and/or
machine damage.
Step 2
Engage the drum brake and lock prior to moving your
Cadman Soft Hose
Caddy
. (Located on the drive side)
Figure 9 - Engage Drum Brake and Lock Prior to Transport
img-01200
It is important to verify that the drum brake and lock are engaged
prior to moving your Cadman Soft Hose Caddy. Failure to do so
can result in equipment damage.
