Fig. 20
Fig. 21
Installation:
1.
Use clip to secure microphone to visor or location of choice and route
cable behind the dash.
2.
Connect microphone right angle 2-
pin plug to “Mic input” jack on
splitter harness (note lip on mic input jack in
Fig 22
)
Fig. 22
1.
Connect push-to-talk green or blue phone button to splitter harness
“control button”
input jack in
Fig.22
)
2.
Connect splitter male plug (
“Mic” input) to
module blue input jack as
seen in
Fig. 23
Fig. 23
Warning:
If you experience clicking sound or no audio, please refer back to the
installation steps above. The likely cause is the microphone and control buttons
connections are reversed.
Please also note, it is possible to use original control button (blue phone symbol)
with this kit
