Fig. 18
4.
Tuck and secure any extra wire away from moving parts and test operation
(
See Bluetooth Pairing and Connection
)
The radio cavity in most vehicles may lack extra room
needed to fit aftermarket equipment and because of that
you will have to be creative when fitting this part. Extra
length cables are provided to allow for this flexibility
Secure module and proceed to section next section.
Bluetooth Pairing and Connection
After initial pairing, the STS-HF will automatically reconnect with the paired
phone upon entering the vehicle.
1.
Turn ignition and radio
“ON”.
2.
Red LED inside module will begin to flash
3.
Access your smartphone Bluetooth menu settings, and search (scan)
for devices.
4.
Select G2 and click “Connect”
Note: Supports multiple phones but connects to only one phone at a time.
Caller ID and text display are
not possible in CD
Changer mode
. Operating Bluetooth device is by
pressing control button and your Voice Recognition
application. Use the Becker radio volume button to
control playback level.