Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-MidEast-9369639) -
2016 - crc - 12/9/15
206
Driving and Operating
The indicator light for both systems
is in the instrument cluster. This
light will:
.
Flash when TCS is limiting
wheel spin.
.
Flash when StabiliTrak is
activated.
.
Turn on and stay on when either
system is not working.
If either system fails to turn on or to
activate, a message displays in the
Driver Information Center (DIC),
and
d
comes on and stays on to
indicate that the system is inactive
and is not assisting the driver in
maintaining control. The vehicle is
safe to drive, but driving should be
adjusted accordingly.
If
d
comes on and stays on:
1. Stop the vehicle.
2. Turn the engine off and wait
15 seconds.
3. Start the engine.
4. Drive the vehicle.
If
d
comes on and stays on, the
vehicle may need more time to
diagnose the problem. If the
condition persists, see your dealer.
Turning the Systems Off
and On
The
g
button for TCS and
StabiliTrak is on the center console
(ATS) or the steering
wheel (ATS-V).
Caution
Do not repeatedly brake or
accelerate heavily when TCS is
off. The vehicle driveline could be
damaged.
To turn off only TCS, press and
release the
g
button. The Traction
Off light
i
displays in the
instrument cluster and the
appropriate DIC message displays.
See
.
To turn TCS on again, press and
release the
g
button. The Traction
Off light
i
displayed in the
instrument cluster will turn off.
If TCS is limiting wheel spin when
the
g
button is pressed, the system
will not turn off until the wheels stop
spinning.
To turn off both TCS and StabiliTrak,
press and hold the
g
button until
the Traction Off light
i
and
StabiliTrak OFF light
g
come on
and stay on in the instrument
cluster. The appropriate DIC
message displays. See
To turn TCS and StabiliTrak on
again, press and release the
g
button. The Traction Off light
i
and
StabiliTrak OFF light
g
in the
instrument cluster turn off.