Cadillac 2016 ATS Manual Download Page 199 | Manualshive

Page: 199 / 348

background image

Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-MidEast-9369639) -

2016 - crc - 12/9/15

198

Driving and Operating

Automatic
Transmission

P (Park) :

This position locks the

rear wheels. Use this position when
starting the engine because the
vehicle cannot move easily.

{

Warning

It is dangerous to get out of the
vehicle if the shift lever is not fully
in P (Park) with the parking brake
firmly set. The vehicle can roll.

(Continued)

Warning (Continued)

Do not leave the vehicle when the
engine is running. If you have left
the engine running, the vehicle
can move suddenly. You or others
could be injured. To be sure the
vehicle will not move, even when
you are on fairly level ground,
always set the parking brake and
move the shift lever to P (Park).
See

Shifting Into Park

and

Driving Characteristics and
Towing Tips

.

Make sure the shift lever is fully in
P (Park) before starting the engine.
The vehicle has an electronic shift
lock release system. Fully apply the
regular brakes first and then press
the shift lever button before shifting
from P (Park) with the ignition in ON/
RUN/START. If you cannot shift out
of P (Park), ease pressure on the
shift lever and push the shift lever
all the way into P (Park) as you
maintain brake application. Then

press the shift lever button and
move the shift lever into another
gear. See

Shifting out of Park

.

Caution

Shifting to R (Reverse) while the
vehicle is moving forward could
damage the transmission. The
repairs would not be covered by
the vehicle warranty. Shift to
R (Reverse) only after the vehicle
is stopped.

R (Reverse) :

Use this gear to

back up.

At low vehicle speeds, R (Reverse)
can be used to rock the vehicle
back and forth to get out of snow,
ice, or sand without damaging the
transmission. See

If the Vehicle Is

.

N (Neutral) :

In this position, the

engine does not connect with the
wheels. To restart when the vehicle
is already moving, use N (Neutral)
only. You can also use N (Neutral)
when the vehicle is being towed.

«
...
197
198
199
200
201
...
»

Summary of Contents for 2016 ATS





























































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 ATS

Green Motion Building

Brand: Eaton Pages: 12

Brand: Subaru Pages: 3

Brand: DAVIS Pages: 32

3-series convertible

Brand: BMW Pages: 98

Brand: Chevrolet Pages: 376

Brand: Mazda Pages: 15

Brand: Metra Electronics Pages: 8

Challenger 2013

Brand: Dodge Pages: 543

Brand: SCC Pages: 4

Brand: Westfalia Pages: 10

Brand: Oldsmobile Pages: 380

Brand: Jeep Pages: 374

Brand: Connects2 Pages: 8

Brand: Fabbri Pages: 32

Brand: Whelen Engineering Company Pages: 2

Telescoping Computer Base C-TCB-34

Brand: Havis-Shields Pages: 1

Brand: PEUGEOT Pages: 107

Brand: Pogo Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands