Black plate (41,1)
Cadillac Escalade (Europe) Owner Manual - 2013 - CRC - 6/20/12
Instruments and Controls
5-41
Press the customisation button until
EXIT LIGHTING appears on the DIC
display. Press the set/reset button
once to access the settings for this
feature. Then press the
customisation button to scroll
through the following settings:
OFF:
The exterior lamps will not
turn on.
30 SECONDS (default):
The
exterior lamps will stay on for
30 seconds.
1 MINUTE:
The exterior lamps will
stay on for 1 minute.
2 MINUTES:
The exterior lamps
will stay on for 2 minutes.
NO CHANGE:
No change will be
made to this feature. The current
setting will remain.
To select a setting, press the set/
reset button while the desired
setting is displayed on the DIC.
APPROACH LIGHTING
This feature allows you to select
whether or not to have the exterior
lamps turn on briefly during low light
periods after unlocking the vehicle
using the Remote Keyless Entry
(RKE) transmitter.
Press the customisation button until
APPROACH LIGHTING appears on
the DIC display. Press the set/reset
button once to access the settings
for this feature. Then press the
customisation button to scroll
through the following settings:
OFF:
The exterior lamps will not
turn on when you unlock the vehicle
with the RKE transmitter.
ON (default):
If it is dark enough
outside, the exterior lamps will turn
on briefly when you unlock the
vehicle with the RKE transmitter.
The lamps will remain on for
20 seconds or until the lock button
on the RKE transmitter is pressed,
or the vehicle is no longer off. See
Remote Keyless Entry (RKE)
System Operation on page 2
‑
2
for
more information.
NO CHANGE:
No change will be
made to this feature. The current
setting will remain.
To select a setting, press the set/
reset button while the desired
setting is displayed on the DIC.
AUTO MAIN BEAMS
If your vehicle has this feature, it
allows you to select to have the
IntelliBeam system turned off or on.
See
Exterior Lamp Controls on
page 6
‑
1
for more information.
Press the customisation button until
AUTO MAIN BEAMS appears on
the DIC display. Press the set/reset
button once to access the settings
for this feature. Then press the
customisation button to scroll
through the following settings:
OFF (default):
The IntelliBeam
system will be turned off.
Summary of Contents for 2013 Escalade ESV
Page 26: ...Black plate 22 1 Cadillac Escalade Europe Owner Manual 2013 CRC 6 20 12 1 22 In Brief 2 NOTES...
Page 326: ...Black plate 34 1 Cadillac Escalade Europe Owner Manual 2013 CRC 6 20 12 10 34 Vehicle Care...
Page 400: ...Black plate 12 1 Cadillac Escalade Owner Manual 2013 CRC 6 20 12 i 12 INDEX 2 NOTES...
