Cadillac 2013 Escalade ESV, Owner Manual M

Page: 179 / 400

Black plate (13,1)
Cadillac Escalade (Europe) Owner Manual - 2013 - CRC - 6/20/12
Infotainment System 7-13
Bose® AudioPilot®
AudioPilot: The Bose AudioPilot
noise compensation technology.
To use AudioPilot:
1. Press CONFIG to enter the
menu screen, then press
CONFIG repeatedly until Radio
is selected or press the Radio
screen button
2. Press the Automatic Volume
Control screen button to access
the AudioPilot menu.
3. Press ON.
To turn it off, press OFF. When on,
AudioPilot continuously adjusts the
audio system equalisation, to
compensate for background noise,
so that the music sound is
consistent at the set volume level.
This feature is most effective at
lower volume settings where
background noise can affect how
well the music being played is
heard through the vehicle's audio
system. At higher volume settings,
where the music is much louder
than the background noise,
there may be little or no adjustments
by AudioPilot®. For more
information on AudioPilot, visit
www.bose.com/audiopilot.
Radio Data System (RDS)
The audio system has a Radio Data
System (RDS). RDS features are
available for use only on FM
stations that broadcast RDS
information. With RDS, the radio
can do the following:
. Receive announcements
concerning local and national
emergencies
. Display messages from radio
stations
This system relies on receiving
specific information from these
stations and only works when the
information is available. In rare
cases, a radio station may
broadcast incorrect information that
causes the radio features to work
improperly. If this happens, contact
the radio station.
The RDS system is always on.
When information is broadcast from
the FM station that is playing, the
station name or call letters displays
on the audio screen.
RDS Set-Up Menu
The radio's RDS features rely upon
receiving specific information from
the RDS stations. These features
will only work when RDS
information is available.
To enable or disable an RDS
feature:
1. Press CONFIG to display the
setup menu.
2. Press the Radio button to
display the Radio screen
options, or press CONFIG
repeatedly to select one of the
menus located at the top of the
screen.
3. Press the FM RDS Setup screen
button to access the FM RDS
setup screen.