Cadillac 2013 Escalade ESV, Owner Manual M

Page: 377 / 400

Black plate (3,1)
Cadillac Escalade (Europe) Owner Manual - 2013 - CRC - 6/20/12
Service and Maintenance 11-3
. Underbody flushing service.
.
Tyre sealant and compressor kit
(if equipped with tyre sealant
and compressor kit), check
sealant expiration date.
. Verify spare tyre key lock
operation and lubricate as
needed. See
Tyre Changing on
page 10 ‑ 56 .
Additional Maintenance Every
30 000 km or 2 Years
In addition to the items listed under
“ Inspection every 15 000 km or
1 year ” the following items should
be carried out every 30 000 km or
2 years (whichever occurs first):
. Passenger compartment air filter
— replace (if applicable).
. Engine Air Filter Replacement.
. All-wheel-drive vehicles only:
Transfer case fluid change
(severe service) for vehicles
mainly driven in heavy city traffic
in hot weather, in hilly or
mountainous terrain, when
frequently towing a trailer,
or used for taxi, police,
or delivery service. During any
maintenance, if a power washer
is used to clean mud and dirt
from the underbody, care should
be taken to not directly spray the
transfer case output seals. High
pressure water can overcome
the seals and contaminate
the transfer case fluid.
Contaminated fluid will decrease
the life of the transfer case and
should be replaced.
. Automatic transmission fluid
change (severe service) for
vehicles mainly driven in heavy
city traffic in hot weather, in hilly
or mountainous terrain, when
frequently towing a trailer,
or used for taxi, police,
or delivery service.
Replace Every 2 Years
Replace brake fluid every 2 years.
Note: All vehicles with rear-wheel
drive
— change driveline axle oil
every 30 000 km, if vehicle is used
for towing purposes.
Additional Maintenance Every
150 000 km or if Necessary
. Spark plugs — replace
. Automatic transmission fluid and
filter change
. Four-wheel drive only: Transfer
case fluid change (normal
service). Check vent hose at
transfer case for kinks and
proper installation. Check
to be sure vent hose is
unobstructed, clear, and
free of debris. During any
maintenance, if a power washer
is used to clean mud and dirt
from the underbody, care should
be taken to not directly spray
the transfer case output seals.