Cadillac 2006 DTS, Manual

Page: 52 / 80

AM/FM/XM: Touch the source (AM, FM, or XM™, if
equipped) screen button or press the AUDIO key
repeatedly until the desired source is highlighted.
ALL: Touch the ALL screen button to receive a list of
all of the selected band stations in the area. Use the up
and down arrow screen buttons to scroll the frequencies.
Touch the desired frequency. Select the Back screen
button to select the frequency.
XM lists will also contain a category to select and the
stations or channels that pertain to the category.
For XM, touch the left and right arrow screen buttons to
change categories. The station information will appear
on the display. See “Radio Menu” later in this section to
add and remove XM categories from the category
list. When listening to XM stations, you will be able to
select all of the categories when using the right and left
arrow screen buttons on the main audio screen. The
categories, when removed, will not be enabled to select
from the category list screen.
FM lists may also contain a category to select if stations
in your area support Radio Data Systems (RDS).
Refresh List: Touch this screen button to refresh the
list of stations.
When viewing a map screen, the name of the station or
channel will appear on the display.
¨
SEEK /
©
SEEK: To seek stations, press the left
or right arrow keys to go to the next or previous
station and stay there.
To scan stations, press and hold either arrow for more
than two seconds. The radio will go to a station,
play for a few seconds, then go on to the next station.
To stop scanning, press either arrow again.
FM source shown, other sources similar
3-4