2-39
Turn Signal/Multifunction Lever
The lever located on the left side of the steering column
includes the following:
D Turn and Lane Change Signals
D Headlamp High/Low
-
Beam Changer
D Flash
-
To
-
Pass Feature
For information on the exterior lamps, see “Exterior
Lamps” later in this section.
Turn and Lane-Change Signals
To signal a turn, move the lever on the left side of the
steering wheel all the way up or down. The lever returns
automatically when the turn is complete.
An arrow located on the
instrument panel cluster
will flash in the direction
of the turn or lane change.
Raise or lower the lever until the arrow starts to flash to
signal a lane change. Hold it there until the lane change
is complete. The lever returns when it is released.
If the turn signal is left on, a warning chime will sound
and the Driver Information Center (DIC) will display
TURN SIGNAL ON after driving about a mile to
remind you to turn it off.
Arrows that flash rapidly when signaling for a turn or
lane change may be caused by a burned
-
out signal bulb.
Other drivers won’t see the turn signal.
Replace burned
-
out bulbs to help avoid possible
accidents. Check the fuse (see “Fuses and Circuit
Breakers” in the Index) and for burned
-
out bulbs
if the arrow fails to work when signaling a turn.
Summary of Contents for 2002 Seville
