Cadex C5100 Battery Tester User Guide
3. Select the correct matrix for the battery by pressing the
d
or
c
key.
4. Press
Charge
. The C5100 will perform a fast charge.
5. When the battery has finished charging, the Ready LED
will be lit. If there was a problem during charge, the Fail
LED will be lit.
Cycle a Li-ion Battery
The Cycle
button charges/discharges/charges a battery and displays the battery’s capacity in % in
about 7 hours.
1. Apply AC power to turn on the Cadex C5100 Battery
Tester. The Run LED light will flash if a battery adapter is
installed and a battery is inserted in the adapter.
2. Insert the Li-ion battery to cycle.
3. Select the correct matrix for the battery by pressing the
d
or
c
key.
4. Press
Cycle
. The C5100 will perform
charge/discharge/charge and indicate the measured
capacity result in %.
5. When the battery has finished cycling, the Ready LED will
be lit and the battery’s capacity in % indicated on the
display. If there was a problem during cycling, the Fail
LED will be lit.
Select an Active C-Code
The Cadex C5100 Battery Tester uses one C-Code of the available
C-Codes (10 maximum) stored in the installed battery adapter as
the active C-Code.
To select a different active C-Code:
1. Insert a Li-ion battery. Press the
dc
keys to select the
appropriate C-Code.
2. Press the appropriate program button to start processing.
The battery Voltage and C-Code rated Capacity (mAh) are
displayed for each C-Code.
16
©
2009 Cadex Electronics Inc.
