background image

SHELL UP - SHELL PS -BREEZE AIRTIGHT

30

PROBLEM

CAUSE

SOLUTION

INTERVENTION

Pellets do not reach 

the combustion 

chamber

Empty hopper

Full the hopper.

Open fire door or 

open pellet door

Close fire door and pellet door and check that there are no pellet 

grains at the gasket level.

Clogged stove

Fume chamber cleaning

Auger blocked by a 

foreign object (for 

example nails)

Clean the auger.

The auger geared 

motor is out of order Replace the geared motor.

Check if on the 

display there is an 

"ACTIVE ALARM"

Have the stove checked.

The fire extinguish 

and the stove stops

Empty hopper

Full the hopper.

Auger blocked by a 

foreign object (for 

example nails)

Clean the auger.

Bad quality pellets

Try other types of pellets.

Pellet drop value too 

low "phase 1"

Adjust the pellet loading.

Check if on the 

display there is an 

"ACTIVE ALARM"

Have the stove checked.

Flames are weak and 

orange coloured, 

pellets do not burn 

properly and the 

glass blackens

Not sufficient com-

bustion air

Check as following: probable obstructions of the combustible air 

inlet from the back or from the bottom of the stove; burning pot 

obstructed holes with too ash remains. Have the fan blades and 

auger cleaned. (see SMOKE RPM VARIATION User Manual)

Obstructed exhaust

The exhaust chimney is partially or totally obsturcted. Contact an 

expert stove-repairer who checks the stove from the exhaust up to 

the chimney pot. Provide immediately for stove cleaning. 

Obstructed stove

Provide immediately at the inner cleaning of the stove.

The fume fan is out 

of order

The pellets can burn also thanks to chimney flue depression 

without the aid of the fume fan. Have the fume fan immediately 

replaced. It can be noxious to health to let the stove running 

without fume fan.

Summary of Contents for SHELL3 UP


































Reviews: