VI.
F
IRMWARE
U
PDATE
4. Update the Firmware
a.
Power on the unit
BEFORE
continuing.
b.
From host PC, click on the file named "CTII_Programming.exe."
The dialogue should look like this:
Note: If you receive a warning message “Windows protected your pc”, it’s OK. Click
on “more info” and then click on “open file anyways”.
c.
Turn off the unit.
d.
Click the Program button and within 5 SECONDS, power on the unit.
If you do not power on the unit within 5 seconds you will get an
error. It’s OK, just close the error box and start again.
e.
While transferring you will see the following:
f.
When the upload is complete you will see the following.
Pg. 14
