© 2021 Carrier
1 / 26
P/N 466-2946-
ML • REV D • ISS 16MAR21
NXG-1820-EUR Touch Screen Installation Sheet
EN
EL
ES
FR FR-BE IT
NL NL-BE PT
EN: Installation Sheet
Product Summary
The NXG-1820-EUR is an intuitive graphical touch screen
interface for users of the xGen security system family. Offering
simple fingertip control of the security system with a clear
3.5” touch screen with easy to understand graphics. It can be
customized for each location when it is installed. This includes
custom naming of zones, partitions, users and output names.
Users can even leave messages for other users via the internal
message centre. With the NXG-1820-EUR, security is just a
touch away.
Keypad Installation
1. Loosen the bottom screw.
2. Tilt the keypad from the bottom and remove it from the
wall bracket.
3. Use the wall bracket as a template to mark where the bus
cable should feed through the wall.
4. Drill appropriate holes and feed security cable through the
wall bracket.
5. Screw the wall bracket to the mounting surface.
6. Feed the cable from the wall through the supplied choke
and loop it twice to provide three (3) turns.
