13
Area 5 is selected and Area 5 is ready to arm. To exit the individual partition
mode, enter [#]-[#].
Silencing Alarms in the Multi-Partition Mode
If the keypad is sounding an alarm or the siren is running, it can be silenced by entering a code with the authority for
the area(s) that are in alarm. NOTE: The [EXIT], [BYPASS], and Alarm Memory [
U
]-[3] function keys will only work
if an individual partition is selected.
SERVICE DISPLAY
The following message will be displayed periodically if the security system requires service.
6HUYLFH5HTXLUHG
7\SH
U
IRUKHOS
If you see this display, press [
U
]-[2]. One or more of the following fault
messages will be displayed. Use the scroll keys to browse through
them. To exit the service messages, press [#] [#].
&RQWURO
2YHU&XUUHQW
A short circuit of a control
s power supply has occurred.
&RQWURO
6LUHQ7URXEOH
Open circuit has occurred on the bell or siren circuit.
&RQWURO
%R[7DPSHU
(Optional) The Box Tamper circuit has activated.
&RQWURO
3KRQH7URXEOH
The Phone Line connected to the control is not operating properly.
&RQWURO
)DLOWR&RPP
The control attempted to communicate a message to the Central
Station, but was unsuccessful.
&RQWURO
*URXQG)DXOW
A short to ground has been detected on a control circuit.
&RQWURO
/RVVRI7LPH
Your system has lost total power and needs the clock reset.
&RQWURO
3RZHU7URXEOH
The main power to your system is not on.
$UHD5HDG\
7\SHFRGHWRDUP