7. Fitting and Changing the Gas Container
8. Using the Appliance
Caution: As accessible parts become very hot, the use of oven gloves is advisable. Keep young children
away from the appliance.
BBQ. (8210)
Non-Stick Reversible Grill. (8220)
Before fitting the regulator to a gas container, ensure that the seal on the regulator is in position and in good condition. This should be
done with every connection.
Ensure that the gas container is fitted or changed in a well-ventilated location, preferably outdoors, away from any source of ignition such
as naked flames or electric fires and away from other people.
Making sure that the gas container is kept upright, screw the regulator onto the container until it is fully engaged. Hand-tighten only.
If there is a leak on your appliance (smell of gas), take it outside immediately into a well-ventilated flame-free location where the leak may
be detected and stopped. If you wish to check for leaks on your appliance, do it outside using soapy water only, which is applied to the
joints. The formation of bubbles will indicate the gas leak.
Check that all the connections are securely fitted and re-check with soapy water. If you cannot rectify the gas leak,
Contact your local CADAC stockist for assistance.
When changing a gas container, firstly close the container valve (if fitted) and then turn the Control Knob (L) clockwise to its stop
position. Ensuring that the flame is extinguished, unscrew the regulator. Refit a full container following the same precautions as described
above.
To prepare the Skottel BBQ option for use place it onto the Burner Pan (D) so that all three Locators (V)
Cooking temperatures are easily adjusted to suit your own requirements by turning the Control Knob (L) to regulate the degree of heat. A
feature of the Skottel BBQ is that it offers various heat zones
This is very useful as some foods cook quicker than others
and the food that is ready first, can be moved to the cooler areas of the dish to keep warm whilst the balance of the food is still cooking.
Useful optional accessories are the Skottel Food Warmers (I2) that attach onto the Skottel BBQ to keep food on the edge where it
remains warm without drying out or over cooking. See Spares and Accessories table.
To prepare the BBQ option for use, first place the Fat Pan (B) on the Burner Pan (D) making sure that the location recesses on the
Fat Pan (B) line up with the Fat Pan Locators (U
the outer edge of the Burner Pan (D). Also ensure that the Inspection Holes
(C) on Fat Pan line up with Inspection Holes on Burner Pan. Place the Deflector Plate (H2) centrally into the bottom of the Fat Pan (B) so
that it rests on its five feet. Complete the assembly by placing the chromed Wire Grid (H1) in place within the location recess in the Fat
Pan (B).
To prepare the Non-Stick Reversible Grill option for use, first place the Fat Pan (B) on the Burner Pan (D) making sure that the location
recesses on the Fat Pan (B) line up with the Fat Pan Locators
the outer edge of the Burner Pan (D).
Depending on the desired cooking option, place the
Non-Stick Reversible Grill Plate (G) with either the ribbed or flat surface face up, securely within the upper recess of the Fat Pan (B). The
easy to clean, non-stick surface allows for healthier cooking using less fat.
Adjust the cooking time and temperature depending on personal preferences for rare, medium or well done. Meat cooked in this manner,
on the ribbed surface of the Non-stick reversible grill plate (G) will have the blackened lines as on professionally grilled steaks.
do not use the
appliance.
Your Eazi Chef Skottel BBQ is now ready for use.
Your Eazi Chef BBQ is now ready for use.
Your Eazi Chef Grill is now ready for use.
Skottel BBQ. (8200)
Also ensure that
the Inspection Holes (C) on Fat Pan line up with Inspection Holes on Burner Pan.
(Fig.7a) will properly mate with
the lip on the circumference of the Burner Pan (D) thus ensuring a stable fitment.
(See Fig.7b).
) (Fig.5) on
(U) (see Fig.5) on
To prepare the Paella BBQ option for use, place the Paella into the Burner Pan (D) so that it rests securely on the fat pan locators (U).
The BBQ Lid (A) may be used with the Skottel BBQ, Paella Pan, BBQ and Non-Stick Reversible Grill options. When used with the Skottel
BBQ, the chromed Wire Grid (H1) can be placed on the Skottel BBQ to lift the food to be cooked away from the fats that drip off the food
during the cooking process. The heat is generated by radiant heat from the Skottel BBQ. The BBQ Lid simply rests on the Skottel BBQ or
Paella Pan during cooking. When used with either the BBQ or Non-Stick Reversible Grill option, the BBQ Lid (A) locates on the outer lip
of the Fat Pan (B). This gives a more direct type of heating for faster cooking. When used with the BBQ for roasting, pour a cup of water
in the Fat Pan (B) to provide a cleaner cooking environment.
Do not use the BBQ Lid on any of the above configurations with the appliance running at the full (high) or intermediate (medium) rates.
Use the BBQ lid configurations only at the reduced rate (low) setting this should produce more than enough heat for cooking under
normal circumstances. As this appliance has a high heat output, using more heat while cooking with the BBQ Lid may cause damage to
certain components. When handling the BBQ Lid it is recommended to use the supplied glove for the handle as this becomes hot during
use.
The pot stand (X) fits inside the Burner Pan and not the Fat Pan. Place the pot to be used centrally onto the Pot Stand.
Your Eazi Chef Paella is now ready for use.
Refer to your enclosed Recipe Book for mouth-watering recipe ideas to “Take Your Tastebuds On An Adventure”.
Paella BBQ. (8260)
BBQ Lid.
Pot stand.
Pot sizes that
may be used are a minimum of 150mm in diameter and a maximum of 300mm in diameter. When using this configuration, be careful not
to turn the heat up too much when using pots that have handles that could be damaged by the heat escaping from underneath the pot.
Summary of Contents for EAZI CHEF 8200
Page 4: ......
