background image

4

13

PACKAGE CONTENTS

V5 Transceiver (x2)

* 3.5mm Plug Cable CA-350 (x1)

* 6.35mm Plug Adapter PA-635 (x1)

"When Light Dances 2" Album (x1)

User Manual (x1)

AAA Alkaline Battery (x4)

* PC Sync Cable CA-100 (x1)

Flash Stand FS-5 (x2)

* also available as optional accessories

NOTICES

NOTICES FOR CUSTOMERS IN THE U.S.A.
Federal Communications Commission (FCC) Radio Frequency 

Interference Statements

This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These 

limits are designed to provide reasonable protection against harmful 

interference  in  a  residential  installation.  This  equipment  generates, 

uses and can radiate radio frequency energy and, if not installed and 

used  in  accordance  with  the  instructions,  may  cause  harmful 

interference to radio communications. However, there is no guarantee 

that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one or 

more of the following measures:

HARVEST ONE LIMITED AND THE MANUFACTURER OF THIS WIRELESS 

FLASH  TRANSCEIVER  IS  NOT  RESPONSIBLE  FOR  ANY  RADIO  OR  TV 

INTERFERENCE  CAUSED  BY  UNAUTHORIZED  MODIFICATIONS  TO  THIS 

EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY 

TO OPERATE THE EQUIPMENT

FCC ID: VAAWFTV5

MADE IN CHINA
This device complies with part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) this device may not cause harmful interference, and (2) 

this device must accept any interference received, including interference that may 

cause undesired operation. 

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Cactus

V5

Summary of Contents for V5

















Reviews: