Cactus V5 User Manual Download Page 14

14

CAUTION AND WARNING

Before using your product, read the following safety precautions to 

ensure correct and safe use and to help prevent damage of Cactus V5.

Turn OFF all your equipment (e.g. Cactus units, flash units and 

cameras, etc.) before changing batteries or making connection. 

Observe the correct polarity when changing batteries. There is 

danger of explosion if battery is installed incorrectly.
Remove batteries and switch off the transceiver during storage.
Do not permanently store the product in a high temperature 

environment (i.e. under strong direct sunlight, near cooking 

stoves/oven).
Cactus V5 should never be submerged in liquid or exposed to 

heavy rain unless it is properly protected.
Do not operate the device in the presence of flammable gases or 

fumes.
Do not fire the flash directly into the eyes of someone at close 

range.

1.

2.
3.

4.

5.

6.

3

MAJOR SPECIFICATIONS

Working radio frequency: 2.4 GHz
Number of channels: 16
Supported sync speed: Up to 1/1000s (subject to camera’s sync 

speed limitation)
Effective distance: 0.3m – 100m  (1 ft - 328 ft)
Operating temperature: -20°C to +50°C (-4°F to 122°F)
Flash voltage handling: 0V - 300V
Camera voltage handling: 0V - 6V
Power input: 2 x AAA 1.5V batteries
Dimensions: 82mm (L) x 70mm (W) x 37mm (H)
Weight (per transceiver): 58g

This product Wireless Flash Transceiver V5 is in 

conformity with the provisions of EU Council 

Directive: 1999/5/EC.

The crossed-out wheeled bin means that within the 

European Union the product must be disposed 

separately at the end of product cycle. Do not 

dispose this product with other municipal waste.

R&TTE DECLARATION OF CONFORMITY (DOC)

We, Harvest One Limited, 9D On Shing Industrial Building, 2-16 Wo Liu 

Hang Road, Fo Tan, Hong Kong, declare under our own responsibility 

that the product:

CACTUS WIRELESS FLASH TRANSCEIVER V5

is in conformity with the essential requirements and other relevant 

requirements of the R&TTE Directive (1999/5/EC).
The products are compliant with the following standards and/or other 

normative documents:
SAFETY          

EN 50371: 2002  

EMC 

EN301 489-1 V1.8.1

EN301 489-3 V1.4.1

Radio

EN300 440-1 V1.5.1

EN300 440-2 V1.3.1

Supplementary information:
Technical file held by:

Harvest One Limited

Place and date of issue:

Centre Testing International 

Corporation, 

Build C, Hongwei Industrial Zone, 

Baoan 70 District, Shenzhen, China

December 24, 2010

Signed by or for the 

manufacturer:

Name:

Ling Wai Kwan Date of Signature

Title:

Director

24 Dec 2010

Summary of Contents for V5

















Reviews: