19
8
System connectivity
The charger is equipped with one type of connection interfaces:
•
the WiFi Access Point interface: used for configuration and monitoring purpose
8.1
WiFi interface
The WiFi AP (Access Point) mode is available to let the person in charge of the installation or
the user connecting to the charger.
The WiFi AP mode is the only one provided.
9.1.1
WiFi AP mode
The WiFi AP (Access Point) mode (also referred as “Hot Spot”) is mainly used for configuration
and monitoring purposes.
In this mode, the charger creates a WiFi network with a specified SSID and the user can connect
to that network, based on a point-to-point approach, to apply all the necessary configurations
or to monitor the charger parameters.
The connection to the charger can be established by a PC, tablet or smartphone.
The following steps are necessary to setup the connection between the user device (PC, tablet,
smartphone) and the charger:
