Local Management Screen Overviews
WPIM-S/T User’s Guide
3-5
Figure 3-2
Remote Profiles Setup Screen
1.
Once in the Remote Profiles Setup screen, use the arrow keys to
navigate to and highlight the SELECT command. Press ENTER to
allow navigation in the Remote Profiles Selection(s) area of the
screen.
2.
Using the arrow keys, choose the profile that is to be modified and
press ENTER once it is highlighted.
Once the desired profile is selected, the following fields of the selected
profile can be set or modified as desired: Profile Name, Maker Name,
Calling Number, and Caller Number.
NOTES
Caller ID is not necessary, but it functions as a first level of
security.
If you set the configuration for “no caller id”, and the Telco has
the caller ID phone number identified, you will never receive a
call.
Remote Profiles: There must be 2 profiles set up for BoD, the
first is primary, the second is multilink.
SAVE
SELECT
EXIT
Profile Number
Profile Name
| IF# 4 Name:
RID: 1 PF #: 1
Maker Name
| IF# 5 Name:
RID: 2 PF #: 2
Calling Number
| IF# 6 Name:
RID: 3 PF #: 3
Caller Number
| IF# 7 Name:
RID: 4 PF #: 4
BoD Configuration
| IF# 8 Name:
RID: 5 PF #: 5
| IF# 9 Name:
RID: 6 PF #: 6
| IF# 10 Name:
RID: 7 PF #: 7
| IF# 11 Name:
RID: 8 PF #: 8
| IF# 12 Name:
RID: 9 PF #: 9
| IF# 13 Name:
RID: 10 PF #: 10
REMOTE PROFILES SETUP
rem_prof
<host name> Local Management
Flash Image Version: xx.xx.xx
CLEAR
REMOTE PROFILE CONFIGURATION
REMOTE PROFILE SELECTION(S)
