Chapter 3: Local Management
3-4
WPIM-S/T User’s Guide
[WPIM X] (Command)
Allows the user to select the WPIM that is to be configured. Once it is
selected, the user can enter the screens to modify the data.
WAN INT CONFIG (Command)
When this selection is highlighted and the ENTER key is pressed, the
WAN Interface Configuration screen displays.
REMOTE SETUP (Command)
When this selection is highlighted and the ENTER key is pressed, the
Remote Setup screen displays. The Mgr Type (ISDN BRI) must have
already been configured and saved, otherwise this screen is not accessible.
RETURN (Command)
Allows the user to return to the previous screen.
3.1.2
Remote Profiles Setup
The Remote Profiles Setup screen allows the user to set up the phone
numbers and names for each of the interfaces.
To access the Remote Profiles Setup screen from the WAN Physical
Configuration screen, use the arrow keys to highlight the Remote Setup
menu item, then press ENTER. The screen shown in
Figure 3-2
displays.
NOTE
The ISDN Protocol Manager must already be set up in order for
this screen to be accessible. See
Section 3.1.1
for details.
