INSTALLATION
2-2
•
RS232 console cable kit, which includes an RJ45-to-DB9 PC
adaptor and a straight-through cable with RJ45 plugs
•
TRMM-2 Management Module User’s Guide and TRMM-2
Quick Installation Guide
Save the box and packaging materials for possible future repackaging
and shipment.
2.
Put on the grounding wrist strap. Remove the TRMM-2 from the
protective bag and place it on top of the bag in a dry, static-free,
dust-free area.
3.
Inspect the contents for any signs of damage.
Notify Cabletron Systems Global Call Center (see Preface) if you
detect any damaged or missing parts.
2.2 SETTING SWITCHES AND JUMPERS
Switchblock 1 (SW1), shown in
Figure 2-1
, contains switches that:
•
Set the speed of FNB rings
•
Set the STATION port interface ring speed
•
Clear NVRAM
2.2.1 Setting FNB Ring Speeds
Switches 1, 3, 7, and 8 set the ring speeds for the FNB Rings (
Table 2-1
).
These settings may override hardware speed settings on port switching
MIMs. (See
Section 2.3
for complete details about management module
overrides.) The switches do not override the ring speed setting for single
ring MIMs.
NOTE
See
Figure 2-1
when setting switches.
Only reposition the
documented jumpers and switches. All other jumpers are set at
the factory. Note their positions for future reference.
Summary of Contents for TRMM-2
