Ring Map
3-24
Viewing Ring-level Information
Figure 3-12. The Beacon Configuration Window
3.
In the Beacon Recovery field, click in the appropriate field to Enable or
Disable the ABRP capability. ABRP is enabled by default.
4.
In the Ring Port Enable Retry field, click and drag the scroll bar to select the
number of times disabled ring ports will be retried to see if the beaconing
condition clears. Selecting a setting of Infinite (by dragging the scroll bar all
the way to the right) will cause the TRMMIM to continue retrying faulty ring
ports until the beaconing condition clears; selecting a setting of Disabled (by
dragging all the way to the left) will disable this feature. Other allowable values
are 1 to 100.
5.
In the Ring Port Retry Delay field, click and drag the scroll bar to select the
interval, in seconds, between ring port retries. You should select a value which
is a multiple of 7; values which are not divisible by 7 will be rounded down to
the nearest appropriate value.
6.
In the Station Port Enable Retry field, click and drag the scroll bar to select
the number of times disabled station ports will be retried to see if the
beaconing condition clears. Selecting a setting of Infinite (by dragging the
scroll bar all the way to the right) will cause the TRMMIM to continue retrying
faulty station ports until the beaconing condition clears; selecting a setting of
Disabled (by dragging all the way to the left) will disable this feature. Other
allowable values are 1 to 100.
Summary of Contents for SPECTRUM TRMMIM
